|
|
Home >
Audio Visual > Bogen
|
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
In need of Audio & Accessories? POS Global has complete line of Audio Speakers, Amplifiers, Microphone Systems & Accessories.
You can browse online today and feel free to contact us
for more information or to better understand how our products can benefit you.
Plan on buying something else? Don't forget to purchase Barcode Printers.
|
|
Showing: 151 - 180 of 370 Items
|
Total Page(s): 13
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Description |
Price (USD)
|
Availability
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL 2X2,8 BW
Bogen's Model CSD2X2LU is a low-impedance (8-ohm) operation Drop-In Ceiling Speaker that allow fast and simple installation, which saves time, effort, and cost. The CSD2X2L is the perfect ceiling speaker whether your ceiling grid is 2' x 2' or 2' x 4'. Alternatively, just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place.
SKU: BOG-CSD2X2LU Mfgr Part#: CSD2X2LU
|
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL, 2X2 BW
The Bogen CSD2X2U-V2 is a full-range ceiling speaker offering increased options for IP network designers and system integrators of Bogen Nyquist and other systems. The CSD2X2U-V2 can be converted into an intercom appliance, or a source amplifier/speaker for a secondary chain of 25V/70V speakers.
SKU: BOG-CSD2X2UV2 Mfgr Part#: CSD2X2U-V2
|
|
|
|
Bogen
TELEPHONE INPUT MODULE LOOP/GROUND START
The TEL1S module is a transformer-isolated, balanced input and configuration jumper that will allow it to interface with both wet and dry loop telephone systems. In the dry loop mode, this module allows connections to page port systems. In the wet mode of operation, it allows connections to both ground start and loop start telephone systems. The module has a 6- pin screw terminal input barrier strip connector to make the input connection. The module provides for the connection of an external talk-battery power supply of 48V DC. The module also has a gain control that will allow the gain to be adjusted from 0 dB to 30 dB. It has he ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It has a built in limiter, with a threshold control, to limit the maximum output level of the module. The module s output is assignable to either or both of two mixing buses.
SKU: BOG-TEL1S Mfgr Part#: TEL1S
|
|
|
|
Bogen
15-WATT HORN; 8 OHMS
The SPT15A and SP158A are compact, high intelligibility, reentrant-type horn loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model SPT15A has a built-in, rotary impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line. The model SP158A has an 8-ohm impedance only.
SKU: BOG-SP158A Mfgr Part#: SP158A
|
|
|
|
Bogen
RELAY/INPUT/OUTPUT MODULE
Bogen s RIO1S is a multi-functional module with a priority-controlled relay contact, transformer-balanced input, transformer-balanced output, and an RJ11 output for direct connection to the override input of a zone paging system. The RIO1S provides a convenient way to integrate a Power Vector amplifier with a PCM zone paging system, allowing full use of the Power Vector s priority structure in zone paging applications for more sophisticated paging capabilities.
SKU: BOG-RIO1S Mfgr Part#: RIO1S
|
|
|
|
Bogen
1W SELF/AMP SQ MTL ENCL,8"
Bogen's AMBSQ1 and AMBSL1 speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker, built-in 1W amplifier, and volume control. The AMBSQ1 is suitable for ceiling or wall mounting. The AMBSL1 is designed primarily for wall mounting and its face is angled downward by 12.5 degrees. A detachable volume control knob on the grille allows individual adjustment of paging level at each speaker location.
SKU: BOG-AMBSQ1 Mfgr Part#: AMBSQ1
|
|
|
|
Bogen
LINE/MIC INPUT MODULE w/VC
The LMR1S module has a LINE/MIC level input module with remote volume control capability. Input level control are by remote potentiometer or by direct voltage input (0 4.5V DC). Input via front-mounted screw terminals. The LMR1S has an internal, 24V DC phantom power supply that is enabled by a PCB jumper. The module has a gain control that will allow gain to be adjusted from 18 dB to 60 dB in MIC position, or from -2 dB to 40 dB in LINE position. It has the ability to mute lower priority modules and be muted by higher priority modules. The module is also able to assume any of four priority levels. The module has an internal gating circuit with controls for threshold and duration. It has a built-in limiter to control the maximum output level of the module. The module also has an LED to indicate limiter activity. The module has bass and treble controls with cut and boost of 10 dB at 100 Hz and 10 kHz, respectively. The module s output is assignable to either or both of two mixing buses.
SKU: BOG-LMR1S Mfgr Part#: LMR1S
|
|
|
|
Bogen
15W EASYDESIGN HORN LOUDSPEAKR
Bogen s Easy Design line of horn loudspeakers are compact, high intelligibility, reentrant type loudspeakers designed for use with 70V amplifier systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. Both the speakers and the mounting brackets are attractively finished in textured mocha enamel. The HS7EZ is a 7.5-watt single-tap speaker; the HS15EZ, a 15-watt single-tap speaker; and the HS30EZ, a 30-watt single-tap speaker. All three models include a stepped attenuator volume control and come with a tilt and swivel mounting base for greater flexibility in setting the angle of projection. The HS15EZ and HS30EZ are engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning, field replaceable diaphragm), which save both time and money.
SKU: BOG-HS15EZ Mfgr Part#: HS15EZ
|
|
|
|
Bogen
LINE/MIC INPUT MODULE
The LMM1S module has a Line/MIC level input module. Input is via front-mounted screw terminals. It also has an internal, 24V DC phantom power supply that is enabled by a PCB jumper. The module has a gain control that will allow gain to be adjusted from 18dB to 60dB in MIC position, or from -2 dB to 40dB in LINE position. It also has the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of four priority levels and has an internal gating circuit with controls for threshold and duration. The module has bass and treble controls with cut and boost of 10dB at 100 Hz and 10 kHz, respectively. The module s output is also assignable to either or both of two mixing buses.
SKU: BOG-LMM1S Mfgr Part#: LMM1S
|
|
|
|
Bogen
5 WATT AMPLIFIED HORN SPEAKER*NEW 24V
The SAH30, SAH15, and SAH5 powered horn loudspeakers employ digital switching amplifier technology resulting in low DC current draw and low heat dissipation. This means fewer power supplies, longer cable runs, and the capacity to work at higher ambient temperatures when compared to conventional analog self-amplified horn speakers. The horn loudspeakers can be positioned in any orientation (rotate, tilt, or swivel). The shape of the horn flare provides a controlled dispersion of sound for better intelligibility. They can be used in any environment, indoors or outdoors, without affecting sound quality.
SKU: BOG-SAH5 Mfgr Part#: SAH5
|
|
|
|
Bogen
3-ZONE EXPANSION MODULE FOR UTI312 *NEW
The UTI312 Zone Paging Controller provides multi-zone paging for one-way applications such as self-amplified speaker systems, with each output capable of providing audio for up to 150 self-amplified speakers.The UTI312 is compatible with all standard analog port types. Each UTI312 comes with a pre-installed ZX3 module for three zones of paging and is expandable up to 12 zones. The UTI312 offers up to 24 programmable paging zone groups as well as all-call, auto select, override, night ring, two tone triggers, and code calling zone groups.The UTI312 also offers flexible dialing.
SKU: BOG-ZX3 Mfgr Part#: ZX3
|
|
|
|
Bogen
30-WATT HORN, 8 OHMS
The SPT30A and SP308A are compact, high intelligibility, reentrant-type horn loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model SPT30A has a built-in, variable impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line. The model SP308A has an 8-ohm impedance only.
SKU: BOG-SP308A Mfgr Part#: SP308A
|
|
|
|
Bogen
NIGHT RINGER PWR SUPPLY NOT INCLUDED
The NR100 converts virtually any paging system into an after-hours night bell alert system. The economical NR100 night ringer sends an electronic tone through paging system speakers when triggered by the telephone system s night bell circuit, thus eliminating the need for loud, old-fashioned night bells thoughout a facility. The NR100 is an easy and efficient way to alert security guards or other personnel of incoming calls during non-business hours.
SKU: BOG-NR100 Mfgr Part#: NR100
|
|
|
|
Bogen
CEILING SPEAKER, COAX 6" LF, 3/4" HF, 75
The Bogen HFCS1 ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. The HFCS1 offers several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement. The loudspeakers consists of one 6-1/2" (nominal) low-frequency transducer, one 3/4" (nominal) high-frequency transducer, and a filter network for dividing frequencies between the transducers.
SKU: BOG-HFCS1 Mfgr Part#: HFCS1
|
|
|
|
Bogen
CEILING SPEAKER black,coax 6" LF,3/4" HF
The Bogen HFCS1 ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. The HFCS1 offers several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement. The loudspeakers consists of one 6-1/2" (nominal) low-frequency transducer, one 3/4" (nominal) high-frequency transducer, and a filter network for dividing frequencies between the transducers.
SKU: BOG-HFCS1B Mfgr Part#: HFCS1B
|
|
|
|
Bogen
HORN, 15 WATT FLANGE MOUNTED
The Bogen FMH15T is a flange-mounted, high intelligibility, reentrant type loudspeaker. Its sturdy, weatherproof, vandal-resistant, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model FMH15T has a built-in, rotary impedance selector switch for matching the speaker power requirements to a 70V or 25V constant-voltage line. Screw terminals make installation fast and easy. Accessory flush- or surface-mount enclosures, heavy duty cast aluminum grille, and adapter ring are available to complete the installation of this unique speaker. Field maintenance is accomplished using a self-aligning, field replaceable diaphragm
SKU: BOG-FMH15T Mfgr Part#: FMH15T
|
|
|
|
Bogen
24V DC,2.5A(+50CU) POWER SUPPL
The Bogen Model SPS2425 power supply provides regulated 24V DC at 2.5A (50 CU) from a 120V AC, 60 Hz source. The SPS2425 employs switching technology that results in large current capacities while generating minimal heat. The unit is wall mountable using a holster with pluggable terminal strip. The unit weighs 2 lb, and its dimensions are 3" W x 5-3/4" H x 1-3/4" D. The power supply is both UL and C-UL listed.
SKU: BOG-SPS2425 Mfgr Part#: SPS2425
|
|
|
|
Bogen
19" OMNI-DIRECTIONAL MICROPHONGOOSENECK,
The Bogen MGN19A is a push-button, omni-directional, dynamic microphone designed for quality sound installations. The microphone is extremely rugged and reliable and is designed to stand up under the most strenuous handling conditions to provide years of dependable service. A smooth wide band frequency response with intentional boost above 1.5kHz gives a natural, crisp, highly intelligible sound. The microphone is furnished with a 18.15" fully flexible gooseneck and mounting flange.
SKU: BOG-MGN19A Mfgr Part#: MGN19A
|
|
|
|
Bogen
WALL MOUNTED SPKR,6W,6",DUAL CONE,70.7
WALL MOUNTED SPEAKER, 6W, 6", DUAL CONE, 70.7/25V
SKU: BOG-PBC6T72 Mfgr Part#: PBC6T72
|
|
|
|
Bogen
SKR, NEAR 4.5",8 OHMS BLK/TRAN
Bogen Signature S4T & S5T Loudspeakers are compact, versatile, and feature unique driver technologies which produce impeccable sound quality. With their compact form factor, these speakers are an excellent fit for most indoor environments or protected outdoor locations. By using the latest Ferrofluid formulations and robust, oversized, voice coils, the Bogen Signature speakers provide exceptionally high thermal endurance for unmatched long-term power handling and durability. The proprietary MDT metal-alloy cone structure and spiderless MLS driver technology combine to create not only a sonically exceptional loudspeaker, but one which is highly resistant to moisture, humidity, heat, cold, salt, chlorine, and many other common environmental assaults. Designed to both sound and look great, these speakers employ unique MDT and MLS technologies; thick-walled, low-resonance ABS enclosures; scratch-resistant, powder-coated aluminum grilles; and compact, powder-coated cast aluminum swivel mounts.
SKU: BOG-S4TB Mfgr Part#: S4TB
|
|
|
|
Bogen
SPKR, NEAR 4.5",8 OHMS WHT/TRA
Bogen Signature S4T & S5T Loudspeakers are compact, versatile, and feature unique driver technologies which produce impeccable sound quality. With their compact form factor, these speakers are an excellent fit for most indoor environments or protected outdoor locations. By using the latest Ferrofluid formulations and robust, oversized, voice coils, the Bogen Signature speakers provide exceptionally high thermal endurance for unmatched long-term power handling and durability. The proprietary MDT metal-alloy cone structure and spiderless MLS driver technology combine to create not only a sonically exceptional loudspeaker, but one which is highly resistant to moisture, humidity, heat, cold, salt, chlorine, and many other common environmental assaults. Designed to both sound and look great, these speakers employ unique MDT and MLS technologies; thick-walled, low-resonance ABS enclosures; scratch-resistant, powder-coated aluminum grilles; and compact, powder-coated cast aluminum swivel mounts.
SKU: BOG-S4TW Mfgr Part#: S4TW
|
|
|
|
Bogen
ONE-WAY AMPLIFIED HORN/5-WATT400MA
The AH5A and AH15A metal horn speakers are rugged, self-contained one-way amplified paging horn assemblies with screwdriver-adjustable volume controls. Their sturdy, weatherproof, all-aluminum construction makes them ideal for use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreation areas. Universal mounting brackets permit adjustment in vertical and horizontal planes; banding slots are provided for ease in securing the horns to beams and pillars. Quick connections to audio and power sources are easily made with the supplied 4-conductor, color-coded cable. A plastic cover protects the volume control and provides cable strain relief.
SKU: BOG-AH5A Mfgr Part#: AH5A
|
|
|
|
Bogen
CSD1X2 w/BRIGHT WHITE GRILLE (SHIPS 2 PE
CSD1X2 Ceiling Speaker, CSD1X2 Drop-In Ceiling Tile Speaker (with Bright White Grille - Ships 2 per Box)
SKU: BOG-CSD1X2UCA Mfgr Part#: CSD1X2UCA
|
|
|
|
Bogen
HANDHELD, DYNAMIC, OMNI-DIRECTMICROPHONE
The HDO100 is an attractive, dynamic microphone perfectly-suited for public address applications and instrument sound reproduction. The microphone is ruggedly constructed to withstand the demands of a variety of sound installations and provides clear, natural, intelligible sound reproduction with accurate response and dependable performance. The HDO100 microphone model is crafted with professional-grade features, including a rubberized grip, quiet on/off glide switch, and dent-proof screen.
SKU: BOG-HDO100 Mfgr Part#: HDO100
|
|
|
|
Bogen
MICROPHONE - HANDHELD,DYNAMIC,UNI-DIRECT
The HDU150 is an attractive, dynamic, all purpose microphone ideally suited for a wide variety of vocal and sound reinforcement applications. The microphone is ruggedly constructed to withstand the demands of a variety of sound installations and provides clear, natural, intelligible sound reproduction with accurate response and dependable performance. The HDU150 microphone model is crafted with professional-grade features, including a rubberized grip, quiet on/off glide switch, and dent-proof screen.
SKU: BOG-HDU150 Mfgr Part#: HDU150
|
|
|
|
Bogen
ANTENNA SIGNAL AMPLIFIER
ANTENNA SIGNAL AMPLIFIER
SKU: BOG-UHFASA Mfgr Part#: UHFASA
|
|
|
|
Bogen
30 WATT HORN WITH TRANSFORMER
The SPT30A and SP308A are compact, high intelligibility, reentrant-type horn loudspeakers, designed for one-way or two-way sound and communication systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. The Model SPT30A has a built-in, variable impedance selector switch for matching the speaker power requirements to a 25V or 70V constant-voltage line. The model SP308A has an 8-ohm impedance only.
SKU: BOG-SPT30A Mfgr Part#: SPT30A
|
|
|
|
Bogen
30W EASYDESIGN HORN LOUDSPKR
Bogen s Easy Design line of horn loudspeakers are compact, high intelligibility, reentrant type loudspeakers designed for use with 70V amplifier systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. Both the speakers and the mounting brackets are attractively finished in textured mocha enamel. The HS7EZ is a 7.5-watt single-tap speaker; the HS15EZ, a 15-watt single-tap speaker; and the HS30EZ, a 30-watt single-tap speaker. All three models include a stepped attenuator volume control and come with a tilt and swivel mounting base for greater flexibility in setting the angle of projection. The HS15EZ and HS30EZ are engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning, field replaceable diaphragm), which save both time and money.
SKU: BOG-HS30EZ Mfgr Part#: HS30EZ
|
|
|
|
Bogen
LO PROFILE CEILING SPKR 6"CONE75W,70V,16
The Bogen HFCS1LP low-profile ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. The speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.
SKU: BOG-HFCS1LP Mfgr Part#: HFCS1LP
|
|
|
|
Bogen
LOW PROFILE, CEILING SPK BLACK
The Bogen HFCS1LP low-profile ceiling loudspeaker delivers superior sound and clear intelligibility in a variety of ceiling environments. The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions. The speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille). The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and exceptional low-frequency response for both music and speech reinforcement.
SKU: BOG-HFCS1LPB Mfgr Part#: HFCS1LPB
|
|
|
|
|
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Showing: 151 - 180 of 370 Items
|
Total Page(s): 13
|
|
Home >
Audio Visual > Bogen
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
|
|