|
|
Home >
Audio Visual > Bogen
|
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
In need of Audio & Accessories? POS Global has complete line of Audio Speakers, Amplifiers, Microphone Systems & Accessories.
You can browse online today and feel free to contact us
for more information or to better understand how our products can benefit you.
Plan on buying something else? Don't forget to purchase Barcode Printers.
|
|
Showing: 121 - 150 of 370 Items
|
Total Page(s): 13
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Description |
Price (USD)
|
Availability
|
|
|
Bogen
1W VOL CONTROL, TERMINAL STRIPWALL BAFFL
The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with recessed volume control designed for use in 70V amplifier systems. Designed for easy wall-mount installation, the WB1EZ comes pre-assembled.
SKU: BOG-WB1EZ Mfgr Part#: WB1EZ
|
|
|
|
Bogen
STEREO AUX INPUT DUAL RCA
The SAX1R module is a stereo, high-impedance, unbalanced input module. The module has two RCA jacks for its input connectors. The module has a gain/trim control that will allow the gain to be adjusted from -20 dB to +6 dB relative to 0 dB nominal gain. It has the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. It also has a continuously variable ducking control that will enable attenuation of the input signal from a minimum of 10 dB to a maximum of 48 dB relative to the normal unmuted condition and a gradual fade back from mute when the mute or gate control is deactivated. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit, with controls for threshold and duration. The module has bass and treble controls with cut or boost of 10 dB at 100 Hz and 10 kHz, respectively. The module s outputs are independently assignable to each of two mixing buses and allow stereo sources to be summed and sent mono to either or both of two mixing buses.
SKU: BOG-SAX1R Mfgr Part#: SAX1R
|
|
|
|
Bogen
SPEAKER W/ T725 AND TERMINAL STRIP & VOL
SPEAKER, WALL BAFFLE w/ TRANSFORMER, RECESSED VOLUME CONTROL, SCREW TERMINALS, WALNUT FINISH
SKU: BOG-WBS8T725BRV Mfgr Part#: WBS8T725BRV
|
|
|
|
Bogen
INPUT MODULE
The TBL1S input module is a transformer-isolated, line-level, balanced input module. The module has a pluggable 3-pin screw terminal input barrier strip connector to make the input connection. The module has a jumper-selectable input impedance of 600 ohms or 10k ohms. The module also has a gain/trim control that will allow the gain to be adjusted from -11 dB to +19 dB. It has the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It also has a continuously variable ducking control that will enable attenuation of the input signal from a minimum of -10 dB to a maximum of - 72 dB relative to the normal unmuted condition and a gradual fade back from mute when the mute or gate control is deactivated. The module s output is assignable to either or both of two mixing buses.
SKU: BOG-TBL1S Mfgr Part#: TBL1S
|
|
|
|
Bogen
AMT HANGING HARDWARE KIT
AMT Rigging Kit for Apogee models AMT-15 and AMT-12 Loudspeakers.
SKU: BOG-1092151 Mfgr Part#: 109-2151
|
|
|
|
Bogen
Hi-Z STEREO-BAL INPUT MODULE SCREW TERMI
The BAL2S input module shall be a stereo, high-impedance, electronically-balanced input module. It shall be mutable by higher priority modules and shall feature an internal PCB jumper to enable or disable muting from the priority bus system. It shall have a continuously variable ducking control that will enable attenuation of the input signal from a minimum of 10 dB to a maximum of 48 dB relative to the normal unmuted condition. The module shall have a rapid mute when the mute function is activated and a gradual fade back from mute when the mute control is deactivated. Gain shall be switch selectable per channel and shall be 0 dB or +18 dB.
SKU: BOG-BAL2S Mfgr Part#: BAL2S
|
|
|
|
Bogen
MIC INPUT, ELECTRONIC BALANCEDXLR
Bogen s advanced plug-in modules provide a wide range of functions to support a variety of applications. These modules support different signal-source requirements, including the ability to interface to balanced and unbalanced high- and low-level inputs, stereo or mono, telco systems, and microphones. *NOTE* The MIC1X module is now EOS. The MIC2X module is a fully functional substitute for the MIC1X in existing installations and new specifications.
SKU: BOG-MIC2X Mfgr Part#: MIC2X
|
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL, 1X2
Bogen's CSD1X2 and CSD1X2VR Drop-In Ceiling Speakers are full-range speakers that allow fast and simple installation, which saves time, effort, and cost. The CSD1X2/VR is the perfect ceiling speaker whether your ceiling grid is 1' x 2' , 2' x 2', or 2' x 4'. Just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place.
SKU: BOG-CSD1X2 Mfgr Part#: CSD1X2
|
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL,1X2, BRW
The Bogen CSD1X2U-V2 is a full-range ceiling speaker offering increased options for IP network designers and system integrators of Bogen s Nyquist and other systems. With the easy addition of one of several available Nyquist plenum-rated amplifier modules, the CSD1X2U-V2 can be converted into an intercom appliance, or a source amplifier/speaker for a secondary chain of 25V/70V speakers.
SKU: BOG-CSD1X2UV2 Mfgr Part#: CSD1X2U-V2
|
|
|
|
Bogen
CALL-IN BUTTON WITH ILLUMINATED LED RING
CALL-IN BUTTON WITH ILLUMINATED LED RING, MOMENTARY, 1G SS, BLUE
SKU: BOG-CBSS1GLEDB Mfgr Part#: CB-SS1G-LED-B
|
|
|
|
Bogen
25V/70V Matching Transformer Module, Max
Bogen s Matching Transformer Module helps optimize a background music/paging system's performance when driving multiple 70.7V transformer-based speakers using Bogen direct drive Class D audio power amplifiers especially in retrofit installations where the loudspeakers and wiring are being reused and the overall wire lengths, wire gauge, and loudspeaker power tap settings are unknown. The MT300M Matching Transformer Module works in applications where the amplifier s power does not exceed 250W. The module is manufactured with proven Bogen quality and reliability and backed by an industry leading five (5) year warranty. NOTE: It's important to note that any amplifier used with the MT300M must be capable of setting a high-pass (low-cut) filter at a minimum of 50Hz to prevent distortion that can occur due to transformer saturation.
SKU: BOG-MT300M Mfgr Part#: MT300M
|
|
|
|
Bogen
MIC INPUT ELECTRONIC BALANCEDSCREW TERMI
The MIC2S module has an electronically-balanced input with screw terminal connector. It has an interface with low-impedance dynamic microphones. It also has an interface with electret condenser microphones and an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper. The module has a gain control that will allow the gain to be adjusted from 18 dB to 62 dB and the ability to mute lower priority modules and be muted by higher priority modules. The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with a threshold control. It has a built-in limiter, with a threshold control, to limit the maximum output level of the module. The module has bass and treble controls with cut only of 10 dB at 100 Hz and 3 kHz, respectively. The module also has a voice enhancement control for improving voice intelligibility. The module s output is assignable to either or both of two mixing buses. *Note: The MIC1S has gone EOS and been replaced by the MIC2S.
SKU: BOG-MIC2S Mfgr Part#: MIC2S
|
|
|
|
Bogen
SQ MTL ENCL,8" 4W TRANS w/VR
Bogen's MB8TSQ and MB8TSL speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker and multi-tap 4-watt 70V/25V transformer. The MB8TSQ speakers are suitable for ceiling or wall mounting. The MB8TSL speakers are designed primarily for wall mounting, with front face angled downward by 12.5 degrees. Models with "VR" suffix have a recessed volume control at the center of the grille.
SKU: BOG-MB8TSQVR Mfgr Part#: MB8TSQVR
|
|
|
|
Bogen
AS1 WITH WALL BAFFLE, WALNUT,50MA
The Bogen ASWB1 Self-Amplified Wall Baffle Speaker is an 8", cone-type loudspeaker, complete with a built-in 1-watt amplifier and volume control knob. Volume control knob allows adjustment of the paging level at each speaker location in the system. The speaker is available fully assembled in a simulated walnut finished wall baffle .
SKU: BOG-ASWB1 Mfgr Part#: ASWB1
|
|
|
|
Bogen
RS485 JUNCTION BOX FOR PPM/URC
The Junction Box is a Matrix Controller accessory component for the Bogen Core Universal Audio Processor DSP series. It utilizes the RS485 protocol and is used for splitting and/or extending PPM/URC utilizing the Junction Box for daisy-chaining of multiple serial control devices.
SKU: BOG-JB Mfgr Part#: JB
|
|
|
|
Bogen
POWER TRANSFORMER (C35)
POWER TRANSFORMER (C35).
SKU: BOG-8387300 Mfgr Part#: 83-873-00
|
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL, 1X2 w/
Bogen's CSD1X2VRU Drop-In Ceiling Speakers are full-range speakers that allow fast and simple installation, which saves time, effort, and cost. The CSD1X2/VR is the perfect ceiling speaker whether your ceiling grid is 1' x 2' , 2' x 2', or 2' x 4'. Just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place. *CSD1X2VR is not recommended for Sound Masking
SKU: BOG-CSD1X2VRU Mfgr Part#: CSD1X2VRU
|
|
|
|
Bogen
GOOSENECK 16" FLEXIBLE, DYNAMIUNI-DIRECT
The GDU150 is a dynamic, unidirectional gooseneck microphone that features a durable all-metal case with a non-glare black finish. It has an 18" long, fully flexible gooseneck body with an integral XLR mounting base. The GDU150 has a silent push-on/push-off talk switch. It provides outstanding speech intelligibility, feedback rejection, user sound isolation, and a low sensitivity to breath pop noise. The GDU150 has a superior shock-mount system to reject handling and noise transmission.
SKU: BOG-GDU150 Mfgr Part#: GDU150
|
|
|
|
Bogen
NYQUIST IP PAGING SYSTEM - VARIABLE FIRI
The Bogen NQ-SMS1810-VF sound masking loudspeaker assembly consists of an 8 O.D., dual cone loudspeaker with a 10 oz. magnet, and 25V/70V, five position 4W max. rotary tap selector. 2 multi-position hangers included for upward, downward, and side firing installations. Installation is made easy via the included 78" (2m) suspension chain system which allows quick mounting and height adjustment. An integral wire strain relief is located on the top of the enclosure to facilitate secure speaker cable termination.
SKU: BOG-NQSMS1810VF Mfgr Part#: NQ-SMS1810-VF
|
|
|
|
Bogen
CEILING SPK, SMALL FOOTPRINT
The Bogen HFSF1 Small-Footprint Ceiling Speaker delivers superior sound in a very compact enclosure. The speaker is unobtrusive at only 7-1/4 in diameter, and mounts easily in all types of ceilings including existing hard-surface types and suspended ceilings. The HFSF1's low-distortion, coaxial-design speaker, coupled with a computer-matched venting system, delivers superb fidelity for music as well as high intelligibility for voice reinforcement. It provides the perfect solution for environments that require the highest-quality sound with minimal visual impact.
SKU: BOG-HFSF1 Mfgr Part#: HFSF1
|
|
|
|
Bogen
SPEAKER, CEILING DROP-IN, 2X2
Bogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 1-watt, self-amplified speaker that is quick and easy to install. Simply wire it and drop it into place. Available in off-white (ACD2X2) and bright white (ACD2X2U). The ACD2X2 is 2' x 2', designed to fit perfectly into place in 2'x 2' ceiling grids - without needing to cut ceiling tiles. The ACD2X2 can also be easily installed in 2' x 4' ceiling grids using the included support rail.
SKU: BOG-ACD2X2 Mfgr Part#: ACD2X2
|
|
|
|
Bogen
SPEAKER, CEILING DROP-IN,2X2 WhiteGrille
Bogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 1-watt, self-amplified speaker that is quick and easy to install. Simply wire it and drop it into place. Available in off-white (ACD2X2) and bright white (ACD2X2U). The ACD2X2 is 2' x 2', designed to fit perfectly into place in 2'x 2' ceiling grids - without needing to cut ceiling tiles. The ACD2X2 can also be easily installed in 2' x 4' ceiling grids using the included support rail.
SKU: BOG-ACD2X2U Mfgr Part#: ACD2X2U
|
|
|
|
Bogen
Melal Pole for Double Flag Mount Blk
Melal Pole for Double Flag Mount Blk
SKU: BOG-BCAB1BD00S0 Mfgr Part#: BCAB-1BD-00S-0
|
|
|
|
Bogen
7WATT EASYDESIGN HORN LOUDSPKRSOQ1
Bogen s Easy Design line of horn loudspeakers are compact, high intelligibility, reentrant type loudspeakers designed for use with 70V amplifier systems. Their sturdy, weatherproof, all-metal construction is ideal for indoor and outdoor use in industrial plants, warehouses, schools, construction sites, transportation terminals, and recreational areas. Both the speakers and the mounting brackets are attractively finished in textured mocha enamel. The HS7EZ is a 7.5-watt single-tap speaker; the HS15EZ, a 15-watt single-tap speaker; and the HS30EZ, a 30-watt single-tap speaker. All three models include a stepped attenuator volume control and come with a tilt and swivel mounting base for greater flexibility in setting the angle of projection. The HS15EZ and HS30EZ are engineered to simplify installation (with a uniquely designed all-purpose mounting bracket) and field maintenance (with a self-aligning, field replaceable diaphragm), which save both time and money.
SKU: BOG-HS7EZ Mfgr Part#: HS7EZ
|
|
|
|
Bogen
FOREGROUND SPEAKER 20W - BLACK
The Bogen FG20 Foreground speaker is designed to be a value-oriented solution for a wide variety of music environments. Its wide bandwidth provides very clean sound performance while the quality construction ensures the reliability installers can count on. The FG20B is black in color; the FG20W is off-white. The drivers consist of a 3-1/2" woofer and 3/4" Mylar tweeter. Both models of FG20 handle 20 watts @ 8-ohms or have power taps via a rotary switch for 2, 4, 8, 15 or 20 watts @ 70 volts.
SKU: BOG-FG20B Mfgr Part#: FG20B
|
|
|
|
Bogen
FOREGROUND SPEAKER 20W - WHITE
The Bogen FG20 Foreground speaker is designed to be a value-oriented solution for a wide variety of music environments. Its wide bandwidth provides very clean sound performance while the quality construction ensures the reliability installers can count on. The FG20B is black in color; the FG20W is off-white. The drivers consist of a 3-1/2" woofer and 3/4" Mylar tweeter. Both models of FG20 handle 20 watts @ 8-ohms or have power taps via a rotary switch for 2, 4, 8, 15 or 20 watts @ 70 volts.
SKU: BOG-FG20W Mfgr Part#: FG20W
|
|
|
|
Bogen
NYQUIST IP PAGING SYSTEM - SUSPENDED CEI
The Bogen NQ-SMS1810-SCG comprises a ceiling grid mount and a sound masking speaker assembly, which consists of an 8 dual-cone loudspeaker with a 10-ounce magnet and a 25V/70V, 4W max., five position rotary tap selector. A seismic safety cable is supplied to secure the speaker to a solid object in the plenum space. An upfiring sound masking speaker that fits in a standard 1 x2 ceiling tile grid and can be placed on top of an existing ceiling tile The 5-position rotary tap selector provides easy selection of speaker power from 0.25W to 4W in 25V/70V systems UL 2043 rated for plenum use above suspended ceiling systems in air handling spaces.
SKU: BOG-NQSMS1810SCG Mfgr Part#: NQ-SMS1810-SCG
|
|
|
|
Bogen
SELF AMPLIFIED METAL BOX SPKR1 WATT SLAN
Bogen's AMBSQ1 and AMBSL1 speakers feature an all-steel surface-mounted enclosure with an 8" cone loudspeaker, built-in 1W amplifier, and volume control. The AMBSQ1 is suitable for ceiling or wall mounting. The AMBSL1 is designed primarily for wall mounting and its face is angled downward by 12.5 degrees. A detachable volume control knob on the grille allows individual adjustment of paging level at each speaker location.
SKU: BOG-AMBSL1 Mfgr Part#: AMBSL1
|
|
|
|
Bogen
TONE GENERATOR INPUT, 4 OF 8 SELECTABLE,
The TNG1S input module shall be a multiple tone generator input module. The module shall have a 5-pin screw terminal input barrier strip connector to make the trigger connections. The module shall include 8 tones: 512 Hz burst/steady, slow whoop, siren, mechanical bell, Klaxon, night ringer, double chime, and doorbell tones. The module shall permit 4 of the 8 tones to be triggered. Momentary and continuous playback modes shall be available. The module shall have a level control. It shall have the ability to mute lower priority modules and be muted by higher priority modules. The module shall be able to assume any of 4 priority levels. The module shall have a gradual fade back from mute when the mute control is deactivated. The module s output shall be assignable to either or both of two mixing buses.
SKU: BOG-TNG1S Mfgr Part#: TNG1S
|
|
|
|
Bogen
SPEAKER, CEILING, DROP IN PANEL, 2X2, 8
Bogen's Model CSD2X2L is a low-impedance (8-ohm) operation Drop-In Ceiling Speaker that allow fast and simple installation, which saves time, effort, and cost. The CSD2X2L is the perfect ceiling speaker whether your ceiling grid is 2' x 2' or 2' x 4'. Alternatively, just make one simple cut to the ceiling tile, lay the support rail crossbar (included) across the ceiling grid, and drop the speaker into place.
SKU: BOG-CSD2X2L Mfgr Part#: CSD2X2L
|
|
|
|
|
|
1
2
3
4
5
6
7
8
9
10
[Next 10]
[Last]
|
|
Showing: 121 - 150 of 370 Items
|
Total Page(s): 13
|
|
Home >
Audio Visual > Bogen
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
|
|