|
Description |
Price
(USD)
|
Availability
|
|
|
Bogen
INSERTION TOOL
The TL156 is a plastic tool used to install the connector kits onto the PI135A intercom. The insertion tool is included with every connector kit, this is simply a replacement.
SKU: BOG-TL156 Mfgr Part#: TL156
|
|
|
|
Bogen
10-WATT ATTENUATOR
10 W (single-gang size)
SKU: BOG-AT10A Mfgr Part#: AT10A
|
|
|
|
Bogen
CABLE FOR MHH/25 FEET 25' CABLE, FEMALE
This XLR Interconnect Cable is a low-loss mic cable with a female XLR connector at one end, and bare stripped and tinned wires at the other. Ideal for custom installations with Bogen handheld microphones.
SKU: BOG-MAC Mfgr Part#: MAC
|
|
|
|
Bogen
RACKMOUNT KIT FOR TPU35/60/100
Rack Mounting Kit for TPU35B/60B/100B (not for TPU15A/250)
SKU: BOG-RPK82 Mfgr Part#: RPK82
|
|
|
|
Bogen
CABLE-STEEL HANGING WHITE
CABLE-STEEL HANGING WHITE
SKU: BOG-93000305 Mfgr Part#: 93-0003-05
|
|
|
|
Bogen
CALL-IN SWITCH, 3-POSITION WITH PRIVACY
3-position switch providing annunciator call and privacy control. Designed for use with the PI35A, SI35A and MultiGraphic Series 115B/2223/2233 systems. SCR holding circuits actuate the annunciator signal and LEDs in Bogen's SBA-Series room selector panels. Provide momentary press-to-call.
SKU: BOG-CA11A Mfgr Part#: CA11A
|
|
|
|
Bogen
RACK MOUNT KIT FOR TAMB2
Rack Mount Kit for TAMB2 telephone access module
SKU: BOG-RPK91 Mfgr Part#: RPK91
|
|
|
|
Bogen
SPKR W/BRIGHT WHITE GRILL
This ceiling speaker assembly is a pre-assembled 8" ceiling mounted speaker for your 70V or 25V commercial audio system. The speaker is sold complete with transformer, 8" S86 cone and grille cover. It has a bright white finish and a screw terminal bridge. The speaker is easily installed into drop-ceilings, features a 4W capacity and a 50Hz to 12kHz frequency response suitable for paging and background music.
SKU: BOG-S86T725PG8UBR Mfgr Part#: S86T725PG8UBR
|
|
|
|
Bogen
RACK PANEL KIT BPA60
The RPK53 is the rack panel mounting kit for the BPA60.
SKU: BOG-RPK53 Mfgr Part#: RPK53
|
|
|
|
Bogen
RACKMOUNT KIT POWER VECTOR AMP
Rack Mount Kit for Power Vector Amplifiers
SKU: BOG-RPK87 Mfgr Part#: RPK87
|
|
|
|
Bogen
ADDITIONAL MICROPHONE FOR ANS500
This remote microphone is an additional microphone for the ANS501 Ambient Noise Sensor. The remote microphone connects to the sensor and listens to the fluctuation of a room's ambiance. The sensor then compensates and adjusts the paging system's output level accordingly. The ANS500M may be remotely wall or ceiling mounted.
SKU: BOG-ANS500M Mfgr Part#: ANS500M
|
|
|
|
Bogen
MICROPHONE CABLE 25' FEMALE XLR TO MALE
25' male XLR to female XLR microphone cable. DS3 2-conductor plus shield.
SKU: BOG-XLR25 Mfgr Part#: XLR25
|
|
|
|
Bogen
RACK MOUNT KIT FOR PCM2000
Then RPK84 is a rack mounting kit used for mounting 2 to 6 PCM2000 Zone Paging System audio modules to a standard 19" rack and is 4 rack spaces high.
SKU: BOG-RPK84 Mfgr Part#: RPK84
|
|
|
|
Bogen
TILE BRIDGE FOR EZ INSTALL SPK**COMES IN
Tile bridge for easy install speakers (SM1EZ/SM4T)
SKU: BOG-SMTB Mfgr Part#: SMTB
|
|
|
|
Bogen
SPKR W/BRIGHT WHITE GRILLE
This ceiling speaker assembly is a pre-assembled 8" ceiling mounted speaker for your 70V or 25V commercial audio system. The speaker is sold complete with transformer, 8" S86 cone and grille cover. It has a bright white finish and volume knob. The speaker is easily installed into drop-ceilings, features a 4W capacity and a 50Hz to 12kHz frequency response suitable for paging and background music.
SKU: BOG-S86T725PG8UVK Mfgr Part#: S86T725PG8UVK
|
|
|
|
Bogen
S86 ON PG8W GRILLE WITH KNOB VOLUME CONT
S86 8" Cone Speaker with volume control knob in center of grille
SKU: BOG-S86T725PG8WVK Mfgr Part#: S86T725PG8WVK
|
|
|
|
Bogen
POWER SUPPLY FOR PCM2000 1 REQD FOR PCMC
Power Supply (one required per PCMCPU)
SKU: BOG-PCMPS2 Mfgr Part#: PCMPS2
|
|
|
|
Bogen
48VDC 15W WALL PLUG POWER ADAPTER, NQ-E7
48VDC 15W WALL PLUG POWER ADAPTER, NQ-E7010
SKU: BOG-PS4815W Mfgr Part#: PS4815W
|
|
|
|
Bogen
CABLE, STEREO RCA TO RCA 6ft
Universal 6 ft. stereo RCA to RCA cable (music/input sources)
SKU: BOG-SRCA6 Mfgr Part#: SRCA6
|
|
|
|
Bogen
35-WATT ATTENUATOR
Control up to 35W of speakers within a 25V or 70V system
SKU: BOG-AT35A Mfgr Part#: AT35A
|
|
|
|
Bogen
3 1/2" HIGH BRACKETS FOR C35,C60, & C100
Rack Panel Mounting Kit for C35/C60/C100
SKU: BOG-RPK50 Mfgr Part#: RPK50
|
|
|
|
Bogen
S86 SPEAKER W/T725 TRANSFORMERIN WALNUT
WBS8T725 Wall Baffle Speaker with Transformer; walnut
SKU: BOG-WBS8T725 Mfgr Part#: WBS8T725
|
|
|
|
Bogen
RACK MOUNT & SECURITY COVER FOR UTI1 *N
Rack Mount Security Kit for UTI1 (Universal Telephone Interface)
SKU: BOG-RPKUTI1 Mfgr Part#: RPKUTI1
|
|
|
|
Bogen
SQUARE GRILL HD 8" SPKR
Ceiling grille for 13" speakers (semi-glass white enamel). The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker.
SKU: BOG-SGHD8 Mfgr Part#: SGHD8
|
|
|
|
Bogen
SPKR w/BRIGHT WHITE GRILL
SPKR w/BRIGHT WHITE GRILL
SKU: BOG-S810T725PG8UVR Mfgr Part#: S810T725PG8UVR
|
|
|
|
Bogen
S810T725PG8W W/ RECESSED VOL CNTRL
Ceiling Speaker with Recessed Volume Control in off-white; T725 4-watt transformer
SKU: BOG-S810T725PG8WVR Mfgr Part#: S810T725PG8WVR
|
|
|
|
Bogen
1WATT VOLUME CONTROL,TERMINALSTRIP EZ CE
1-watt single-tap ceiling speaker, terminal board for easy installation, volume control knob
SKU: BOG-CS1EZ Mfgr Part#: CS1EZ
|
|
|
|
Bogen
SPKR W/BRIGHT WHITE GRILL S810W/VOLUME C
8" Cone Speaker (S810) pre-assembled onto 13" steel ceiling grille in bright white (PG8U) with volume control knob
SKU: BOG-S810T725PG8UVK Mfgr Part#: S810T725PG8UVK
|
|
|
|
Bogen
S86 SPEAKER W/ T725 TRANSFORMEW/ KNOB VO
Ceiling Speaker Assemblies has 8" Cone Speaker (S86 or S810); volume control with knob
SKU: BOG-S810T725PG8WVK Mfgr Part#: S810T725PG8WVK
|
|
|
|
Bogen
AS1 WITH CEILING GRILLE, WHITE50MA
Amplified Ceiling Speaker with an 8" cone speaker; off-white speaker;mounted with ceiling grill
SKU: BOG-ASWG1 Mfgr Part#: ASWG1
|
|
