|
Description |
Price
(USD)
|
Availability
|
|
|
Bogen
S86 SPEAKER WITH T725 TRANSFORMER
The S86T725 is a 8" cone loudspeaker that handles 7W. This cone comes assembled with T725 transformer. The magnetic structure and diaphragms have been designed for high sensitivity and optimized response characteristics. This loudspeaker can be ceiling mounted or wall mounted.
SKU: BOG-S86T725 Mfgr Part#: S86T725
|
|
|
|
Bogen
TILE BRIDGE & C-RING COMBO FOROCS1 & HFC
Tile Bridge Support Ring for the HFCS1
SKU: BOG-TBCR Mfgr Part#: TBCR
|
|
|
|
Bogen
CALL-IN SWITCH MOMENTARY CLOSURE
Momentary-push switch designed for use with PI/SI35A intercom systems in conjuction with the SCR25A. When pushed and released once, a signal is sent to the MCP35A via the SCR25A call-in module to annunciate the call-in on the SBA225. The room must be equipped with a 25-volt speaker.
SKU: BOG-CA17 Mfgr Part#: CA17
|
|
|
|
Bogen
WALL BAFFLE WALNUT FINISH
WB8 Wall Baffle, with walnut finish, will house any Bogen 8" speaker. Hardware for mounting a speaker to the baffle included. Constructed on 3/8" particle board with reinforced corners. Sloping front panel (13.5 degrees) provides enhanced downward dispersion.
SKU: BOG-WB8 Mfgr Part#: WB8
|
|
|
|
Bogen
GROUND STAKE, MULCH (FOR NEAR BRAND SPEA
GROUND STAKE, MULCH (FOR NEAR BRAND SPEAKERS)
SKU: BOG-GS4 Mfgr Part#: GS4
|
|
|
|
Bogen
TILE BRIDGE SMALL FOOTPRINT
The Tile Bridge Support is designed to offer additional mounting support for the Bogen High-Fidelity, Small-Footprint Speaker (HFSF1) and Compact Ceiling Speaker (SEC4T) when mounted in a suspended ceiling installation.
SKU: BOG-TBSF Mfgr Part#: TBSF
|
|
|
|
Bogen
8 INCH SPEAKER W/XFMR (10 OZ M
The S86T725 is an 8" cone loudspeaker with a 10 ounce magnet, that handles 15W. This cone speaker is assemble with the T725 transformer. The magnetic structure and diaphragms have been designed for high sensitivity and optimized response characteristics. The S810 can be installed with a ceiling grille or in a wall baffle.
SKU: BOG-S810T725 Mfgr Part#: S810T725
|
|
|
|
Bogen
Bracket and Flange Assy SPT15A
Bracket and Flange Assy SPT15A
SKU: BOG-23710501 Mfgr Part#: 23-7105-01
|
|
|
|
Bogen
PASSIVE VOLUME CONTROL FOR AMPLIFIED SPE
Continuously variable volume control; designed to control up to 150 self amplified speakers
SKU: BOG-SLC Mfgr Part#: SLC
|
|
|
|
Bogen
19" RACK KIT FOR GS (D) MODELS
Rack Kit for GS150D / GS250D
SKU: BOG-GSDRPK Mfgr Part#: GSDRPK
|
|
|
|
Bogen
ADAPTER RING, FMH15T 8" SPKR
Adapter ring designed to fit the FMH15T to the 8" speaker opening of SGHD8 grille.
SKU: BOG-FMHAR8 Mfgr Part#: FMHAR8
|
|
|
|
Bogen
ceiling mount speaker
4 Compact 4W Ceiling Speaker
SKU: BOG-SEC-4T Mfgr Part#: SEC4T
|
|
|
|
Bogen
12VDC, 300MA POWER SUPPLY REQUIRED WITH
12VDC, 300mA Power Supply with a barrel type connection
SKU: BOG-PRS40C Mfgr Part#: PRS40C
|
|
|
|
Bogen
SA6 ASSEMBLY ON PG8W GRILLE OFF WHITE
8" S86 speaker with grille in off-white
SKU: BOG-S86T725PG8W Mfgr Part#: S86T725PG8W
|
|
|
|
Bogen
A-SERIES COVER BOOT - BLACK FOUR PER PAC
This terminal block electrical cover for A-Series Speakers (4-pack) will provide extra protection from the elements for electrical connections. This cover has a black finish with a terminable cable exit sprout.
SKU: BOG-ASTB4 Mfgr Part#: ASTB4
|
|
|
|
Bogen
RACK MOUNT KIT
Rack mount kit for mounting 1 or 2 CC-Series half-rack width amplifiers
SKU: BOG-RPK93 Mfgr Part#: RPK93
|
|
|
|
Bogen
24V POWER SUPPLY (REGULATED)
24V POWER SUPPLY (REGULATED)
SKU: BOG-PRS2403R Mfgr Part#: PRS2403R
|
|
|
|
Bogen
PLATINUM SERIES RACK MOUNT KIT
PLATINUM SERIES RACK MOUNT KIT
SKU: BOG-PSRPK Mfgr Part#: PSRPK
|
|
|
|
Bogen
CALL-IN SWITCH, 2-POSITION
Call-In Switch with SCR latch circuit
SKU: BOG-CA10A Mfgr Part#: CA10A
|
|
|
|
Bogen
REMOTE VOLUME CONTROL FOR GS AMPLIFIERS
The GSVRC is a remote volume control designed for controlling volume in systems with a Gold Seal series amplifier. This device can be mounted up to 1000' away from the amplifier in a single gang electrical box.
SKU: BOG-GSRVC Mfgr Part#: GSRVC
|
|
|
|
Bogen
SPKR W/BRIGHT WHITE GRILL S810
This ceiling speaker assembly is a pre-assembled 8" ceiling mounted speaker for your 70V or 25V commercial audio system. The speaker is sold complete with transformer, 8" S810 cone and grille cover. It has a a bright white finish and no volume control. The speaker is easily installed into drop-ceilings, features a 4W capacity and a 70Hz to 15kHz frequency response suitable for paging and background music.
SKU: BOG-S810T725PG8U Mfgr Part#: S810T725PG8U
|
|
|
|
Bogen
S86 SPEAKER W/ T725 TRANSFORMEON A PG8W
This ceiling speaker assembly is a pre-assembled 8" ceiling mounted speaker for your 70V or 25V commercial audio system. The speaker is sold complete with transformer, 8" S810 cone and grille cover. It has an off-white finish and no volume control. The speaker is easily installed into drop-ceilings, features a 4W capacity and a 70Hz to 15kHz frequency response suitable for paging and background music.
SKU: BOG-S810T725PG8W Mfgr Part#: S810T725PG8W
|
|
|
|
Bogen
GRILL for SPEAKER HFCS1
GRILL for SPEAKER HFCS1
SKU: BOG-23717103 Mfgr Part#: 23-7171-03
|
|
|
|
Bogen
INSERTION TOOL
The TL156 is a plastic tool used to install the connector kits onto the PI135A intercom. The insertion tool is included with every connector kit, this is simply a replacement.
SKU: BOG-TL156 Mfgr Part#: TL156
|
|
|
|
Bogen
10-WATT ATTENUATOR
10 W (single-gang size)
SKU: BOG-AT10A Mfgr Part#: AT10A
|
|
|
|
Bogen
CABLE FOR MHH/25 FEET 25' CABLE, FEMALE
This XLR Interconnect Cable is a low-loss mic cable with a female XLR connector at one end, and bare stripped and tinned wires at the other. Ideal for custom installations with Bogen handheld microphones.
SKU: BOG-MAC Mfgr Part#: MAC
|
|
|
|
Bogen
RACKMOUNT KIT FOR TPU35/60/100
Rack Mounting Kit for TPU35B/60B/100B (not for TPU15A/250)
SKU: BOG-RPK82 Mfgr Part#: RPK82
|
|
|
|
Bogen
CABLE-STEEL HANGING WHITE
CABLE-STEEL HANGING WHITE
SKU: BOG-93000305 Mfgr Part#: 93-0003-05
|
|
|
|
Bogen
CALL-IN SWITCH, 3-POSITION WITH PRIVACY
3-position switch providing annunciator call and privacy control. Designed for use with the PI35A, SI35A and MultiGraphic Series 115B/2223/2233 systems. SCR holding circuits actuate the annunciator signal and LEDs in Bogen's SBA-Series room selector panels. Provide momentary press-to-call.
SKU: BOG-CA11A Mfgr Part#: CA11A
|
|
|
|
Bogen
RACK MOUNT KIT FOR TAMB2
Rack Mount Kit for TAMB2 telephone access module
SKU: BOG-RPK91 Mfgr Part#: RPK91
|
|
