|
|
Home >
Audio Visual > Bogen
|
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
In need of Audio & Accessories? POS Global has complete line of Audio Speakers, Amplifiers, Microphone Systems & Accessories.
You can browse online today and feel free to contact us
for more information or to better understand how our products can benefit you.
Plan on buying something else? Don't forget to purchase Barcode Printers.
|
|
Showing: 301 - 330 of 370 Items
|
Total Page(s): 13
|
[First]
[Prev 10]
6
7
8
9
10
11
12
13
|
|
Description |
Price
(USD)
|
Availability
|
|
|
Bogen
IDA8/T ACC & TELEPHONE HY CARD
IDA8 audio output card.
SKU: BOG-IDA8T Mfgr Part#: IDA8T
|
|
|
|
Bogen
C4000 SERIES SYST SW LICENSE BUNDLE UP
NYQUIST C4000 SERIES SYSTEM SOFTWARE LICENSE BUNDLE UPGRADE - B1-TO-B2
SKU: BOG-NQC4000B12UP Mfgr Part#: NQ-C4000-B12UP
|
|
|
|
Bogen
125-WATT RACK MOUNTING AMPLIFIER
The Bogen HTA-Series Power Amplifiers are high performance units employing Power MOSFET technology. The unique characteristics of Power MOSFET circuitry make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight. The HTA125A Model supplies 125 watts and the HTA250A Model supplies 250 watts (RMS continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000 Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50k ohms) unbalanced; and low impedance (500/600 ohms, balanced or unbalanced) using the WMT1A Line-Matching Transformer accessory, as per the following Application Note. Line bridging can be achieved with the optional transformer Model TL100. Residual hum and noise is at least 90 dB below rated output and the output regulation is better than 2 dB from no load to full load. The amps can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70 volts. The amplifiers are capable of safely driving any recommended load continuously. The HTA-Series amps are thermally protected to prevent damage due to excessively high temperatures. Additional failure-preventive devices include overload limiting, short circuit protection, and a SloBlo fuse. Electronic shutdown circuitry is automatically activated if an overload or short occurs and the front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power ON/OFF switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the AC line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally
SKU: BOG-HTA125A Mfgr Part#: HTA125A
|
|
|
|
Bogen
3-YEAR EXTENDED SYSTEM SOFTWARE UPDATE
NYQUIST C4000 3-YEAR EXTENDED SYSTEM S/W UPDATE - BUNDLE 2 (INCL ENHANCEMENTS & STD NEW FEATURES)
SKU: BOG-NQC4SWUP3YRB2 Mfgr Part#: NQ-C4SWUP3YRB2
|
|
|
|
Bogen
Nyquist 2-Ch. x 60W 1U Audio Power Amp G
NYQUIST IP PAGING SYSTEM AMPLIFIER, 70V (1Ch x 120W) / 25V (2Ch x 60W) 1RU IP Power Amp Gen2
SKU: BOG-NQA2060G2 Mfgr Part#: NQ-A2060-G2
|
|
|
|
Bogen
ANTENNA DISTRIBUTION SYSTEM
ANTENNA DISTRIBUTION SYSTEM
SKU: BOG-UHFADS Mfgr Part#: UHFADS
|
|
|
|
Bogen
Wireless Network Repeater
Wireless Network Repeater
SKU: BOG-BCMA1SMG0001 Mfgr Part#: BCMA-1SM-G000-1
|
|
|
|
Bogen
C4000 SYSTEM SOFTWARE LICENSE - MAP BASE
NYQUIST C4000 SYSTEM SOFTWARE LICENSE - MAP BASED PAGNG LICENSE (PER SYSTEM)
SKU: BOG-NQC4000MBP Mfgr Part#: NQ-C4000MBP
|
|
|
|
Bogen
FM 110V BZL RS485 U D 14.0 Green
FM 110V BZL RS485 U D 14.0 Green
SKU: BOG-BCBD33F4061G Mfgr Part#: BCBD-33F-406-1G
|
|
|
|
Bogen
8 BUTTON PAGING MICROPHONE
The unidirectional 8-button paging gooseneck microphone is used with the Universal Audio Processor DSP audio CORE matrix sytem. The number of programmable zones/buttons can be expanded up to 256 zones using the PPMKeypad, which is sold separately. Features include an all-call button, hold, busy, and zone LED signals, and standard RJ45 connectors.
SKU: BOG-PPM8 Mfgr Part#: PPM8
|
|
|
|
Bogen
NYQUIST 4-INPUT, 120W,1RU,PUBLIC ADDRESS
Bogen s Nyquist networked Public Address Mixer/Amplifier (PAMA) series offers cost-effective performance for permanent installations and commercial sound and is designed to meet the rigorous requirements of today s sophisticated sound systems. Developed with the commercial sound contractor in mind, the PAMA series provides unparalleled flexibility and versatility without the need for add-on modules. It includes an embedded pro-audio DSP for extensive and comprehensive signal processing allowing users to skillfully manage and mix multiple audio input channels. The resulting audio signal mix can be directed to the PAMA s speaker out or line out, or streamed over the Nyquist network where it can be used for audio distribution to one or more zones. The PAMAs fit a wide range of commercial audio applications that require multi-zone paging and/or background music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues. These PAMAs are available in 120-, 240-, and 600-watt models, each with the same features to provide power and performance no matter how large or small the application. In addition to their extensive flexibility, the Nyquist networked PAMAs use the latest in Class D amplifier technology and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating efficiency. 4 MIC/Line Inputs CH1-CH4 configurable balanced/unbalanced inputs via 2 XLR and 4 screw-terminal connections CH4 can be configured to support Push-to-Talk Mic applications Mic inputs can be configured to supply Phantom Power when needed.
SKU: BOG-NQPA120 Mfgr Part#: NQ-PA120
|
|
|
|
Bogen
Platinum Series 240W, 8-Ohm/70V, 1-Chann
The next generation of Bogen s Platinum Series (PS) Amplifiers delivers the highest audio volume for all speaker types at specified power levels, eliminating the need for an external impedance matching transformer. The Gen-2 Platinum Series amplifiers include an internal impedance matching transformer and a rear-panel selector switch with separate connector blocks for both 8-ohm/25V and 70V speakers. These new models also retain the powerful features of the first-generation PS models, including the 5-band full parametric equalizer (EQ).
SKU: BOG-PS240G2 Mfgr Part#: PS240-G2
|
|
|
|
Bogen
MODULAR 8 INPUT 250W OUTPUT MODULE COMPA
Bogen's Power Vector modular input amplifier series consists of five models, ranging from 35- to 250-watts of power. Each model accepts up to 8 plug-in modules with 4 levels of priority between modules. Two module bays also accept signal-processing output modules. Each input has its own independent volume control and a signal/clip indicator. An 11-segment LED meter indicates output level.
SKU: BOG-V250 Mfgr Part#: V250
|
|
|
|
Bogen
C4000 SYSTEM SOFTWARE LICENSE - INTERCOM
NYQUIST C4000 SYSTEM SOFTWARE LICENSE - INTERCOM CALL LICENSE (PER CONCURRENT INTERCOM CALL)
SKU: BOG-NQC4000ICL Mfgr Part#: NQ-C4000ICL
|
|
|
|
Bogen
DIGITAL FEEDBACK TERMINATOR (INCLUDES PO
The Bogen DFT120 Digital Feedback Terminator provides high quality recording and playback of audio pages. The DFT120 breaks the acoustical feedback loop created by the telephone handset and paging speaker. The page is first recorded and then played back as soon as the source handset has been put on-hook. High capacity paging is accomplished by the DFT120 s record during playback and page stacking capabilities. User selectable loop start trunk or 4 wire dry loop input interface and selectable 8-ohm or 600-ohm output impedances allow the DFT120 to directly connect to a wide range of customer premise equipment.
SKU: BOG-DFT120 Mfgr Part#: DFT120
|
|
|
|
Bogen
WALL BAFFLE SM 6" SPKR W/ IP MODULE O/P
WALL BAFFLE SM 6" SPEAKER W/ IP MODULE O/P, AUX 202 AMP O/P, POE
SKU: BOG-PBC6IPM Mfgr Part#: PBC6-IP-M
|
|
|
|
Bogen
Nyquist IP Paging System - VOIP Combo
The Bogen Nyquist NQ-S1810WBC VoIP wall baffle combo speaker unit provides the same superior features as the NQ-S1810WT-G3 with the addition of a red LED messaging display and programmable flasher. There is no need for external amplifiers, traditional intercom wiring, or transformer taps to manually set or adjust. Connect the speakers via Cat5 to a PoE capable network switch (or add a PoE injector for a non-PoE switch), add the station into the system and it is ready to operate. The message display can show a clock with date and time (seconds are optional), or user-programmable messaging for standard or emergency announcements. The flasher is completely programmable for color, duty cycle, and duration to differentiate alert types, and can be triggered independent of the message display. As one would expect from Bogen, the HD audio quality is superb, with excellent incoming and outgoing intelligibility. Many two-way speakers use the speakers itself as the microphone, resulting in poor talkback audio quality. The Nyquist Series VoIP Wall Baffle speakers use a separate high-performance MEMS microphone to achieve superior talkback audio. Key Benefits LED Message Display to visually inform students and personnel of the date and time, or scroll emergency or standard messages Programmable messages for predefined or manually-input messages, with longer ones scrolled across the display for a defined period of time Programmable LED flasher for gaining audience attention; use different colors for different types of alerts (e.g. fire, lockdown, weather, etc.) and triggers Routines/Routines API functionality for displaying messages, alerts, and flasher via predefined Routines triggered through system events or API calls.
SKU: BOG-NQS1810WBC Mfgr Part#: NQ-S1810WBC
|
|
|
|
Bogen
30 WATT PAGING HORN w IP MODULE Special
30 WATT PAGING HORN w IP MODULE Special Order
SKU: BOG-APH30IP Mfgr Part#: APH30-IP
|
|
|
|
Bogen
Nyquist 2-Ch. x 120W 1U Audio Power Amp
NYQUIST IP PAGING SYSTEM AMPLIFIER, 70V (1Ch x 240W) / 25V (2Ch x 120W) 1RU IP Power Amp Gen2
SKU: BOG-NQA2120G2 Mfgr Part#: NQ-A2120-G2
|
|
|
|
Bogen
300W 70V DUAL-CHANN POWER AMP
Bogen's Black Max amplifiers are designed to provide maximum performance in constant voltage speaker systems. Dual 70V transformerless outputs deliver exceptionally clean, full bandwidth audio to speaker systems. Up to 1200 watts of total output power on two separate channels of audio (up to 600W per channel/zone) are available in a single unit. High efficiency class H amplifier design and auto-sleep feature reduce power consumption on continuously-powered systems. Specifically designed for the fixed install market with features like: rear-mounted volume controls, independent Low Cut filters, independent input sensitivity switches, input channel link switch, and pluggable input screw terminals. Built-in power sequencing for controlling multiple Black Max amplifiers combats AC current in-rush problems of large audio systems. Massive power toroid and heat sinks; heavy 14-gauge chassis; Back-Slope AC voltage stabilization; clip limiters; and DC voltage, over-current, and thermal protection circuits make this a true workhorse amplifier.
SKU: BOG-X300 Mfgr Part#: X300
|
|
|
|
Bogen
Platinum Series 600W, 80 ohm class D amp
The Platinum Series model lineup includes the PS60 (60W) and PS600 (600W). Bogen s Platinum Series Public Address Amplifiers offer powerful features rarely found in other commercial amplifiers such as a 5-band full parametric EQ.
SKU: BOG-PS600 Mfgr Part#: PS600
|
|
|
|
Bogen
WALL-MOUNT MODULAR AMPLIFIER 8INPUT, 100
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from, with three models levels: 100W, 150W, and 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.
SKU: BOG-WV100 Mfgr Part#: WV100
|
|
|
|
Bogen
Explosion Proof Horn
Bogen Model GA-MLE3-E32 is used to designate the Atlas Sound explosion-proof compression driver/horn assembly Models MLE-3T and MLE-32 when specifying and ordering through Bogen. These assemblies are engineered for high-efficiency voice and electronic signal communication in hazardous areas. Drivers, which are protected within a rugged die-cast aluminum housing, have 30-watt power handling, and are equipped with 1/2 conduit access and an adjustable mounting bracket. The spun aluminum bell provides a 95-degree circular distribution emphasis. Install this loudspeaker to efficiently and safely communicate in combustible and dust-filled areas. Driver complies with the regulations governing electrical equipment at hazardous locations as set forth by the National Electric Code. Driver listed by UL.
SKU: BOG-GAMLE3E32 Mfgr Part#: GA-MLE3-E32
|
|
|
|
Bogen
Nyquist 4-Ch. x 60W 2U Audio Power Amp
NYQUIST IP PAGING SYSTEM AMPLIFIER, 70V (2Ch x 120W) / 25V (4Ch x 60W) 2RU IP Power Amp Gen2
SKU: BOG-NQA4060G2 Mfgr Part#: NQ-A4060-G2
|
|
|
|
Bogen
M-CLASS POWER AMP - 300W/ch STEREO, 600W
Bogen's M-Class delivers on what professional sound installers need most Flexibility, Power, and Reliability. Flexibility 3 modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Power up to 600W/ch stereo or 1200W of 70V mono power. Reliability Massive power toroid and heat sinks; heavy 14-gauge chassis; patented Back-Slope AC voltage stabilization; Clip limiters, DC voltage, over-current, and thermal protection circuits.
SKU: BOG-M300 Mfgr Part#: M300
|
|
|
|
Bogen
250 WATT AMP W/ ALC & APHEX EXCITER CIRC
The Bogen TPU Series Mixer-Amplifiers are unique, wall- or rack-mounted amplifiers, specifically designed for telephone paging applications. These compact units provide voice-activated muting of music when paging, completely eliminating the need for manual activation of switches and the use of external relays. The page channel features automatic output leveling (ALC) as channel input varies, which is particularly important in telephone paging applications, where persons with varying voice levels and paging techniques have access to the system. Installation and maintenance are simple; all connections, adjustments, and mounting are accomplished with a screwdriver.
SKU: BOG-TPU250 Mfgr Part#: TPU250
|
|
|
|
Bogen
NYQUIST c4000 system sound masking licen
NYQUIST C4000 SYSTEM SOUND MASKING S/W LICENSE
SKU: BOG-NQC4000SML Mfgr Part#: NQ-C4000SML
|
|
|
|
Bogen
AFI-2s2, W/MF BLACK LOUDSPEAKER
The AFI-2s2, with its carefully arranged woofers, extends vertical pattern control down to 500 Hz making it ideal for smaller spaces with poor acoustics. It is well suited for use as the main speaker in mid-sized houses of worship, auditoriums, and meeting rooms. With 120dB max SPL, the AFI-2s2 is powerful enough for bars and small clubs.
SKU: BOG-1060217 Mfgr Part#: 106-0217
|
|
|
|
Bogen
3-YEAR EXTENDED SYSTEM SOFTWARE UPDATE
NYQUIST C4000 3-YEAR EXTENDED SYSTEM S/W UPDATE - BUNDLE 3 (INCL ENHANCEMENTS & STD NEW FEATURES)
SKU: BOG-NQC4SWUP3YRB3 Mfgr Part#: NQ-C4SWUP3YRB3
|
|
|
|
Bogen
250-WATT RACK MOUNTING POWER AMPLIFIER
The Bogen HTA-Series Power Amplifiers are high performance units employing Power MOSFET technology. The unique characteristics of Power MOSFET circuitry make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight. The HTA125A Model supplies 125 watts and the HTA250A Model supplies 250 watts (RMS continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000 Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50k ohms) unbalanced; and low impedance (500/600 ohms, balanced or unbalanced) using the WMT1A Line-Matching Transformer accessory, as per the following Application Note. Line bridging can be achieved with the optional transformer Model TL100. Residual hum and noise is at least 90 dB below rated output and the output regulation is better than 2 dB from no load to full load. The amps can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70 volts. The amplifiers are capable of safely driving any recommended load continuously. The HTA-Series amps are thermally protected to prevent damage due to excessively high temperatures. Additional failure-preventive devices include overload limiting, short circuit protection, and a SloBlo fuse. Electronic shutdown circuitry is automatically activated if an overload or short occurs and the front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power ON/OFF switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the AC line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally
SKU: BOG-HTA250A Mfgr Part#: HTA250A
|
|
|
|
|
|
[First]
[Prev 10]
6
7
8
9
10
11
12
13
|
|
Showing: 301 - 330 of 370 Items
|
Total Page(s): 13
|
|
Home >
Audio Visual > Bogen
|
Audio Speakers, Amplifiers, Microphone Systems & Accessories
|
|
