|
Description |
Price
(USD)
|
Availability
|
|
HAT Design Works
Ingenico iPP320/350 Payment Device Stand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included M2.5-0.45x12mm PPhMS plus Cable Clip. Compatible with Ingenico iPP320/iPP350. Counter mounting hardware not included. Black.
SKU: IOP-PTS04IPP32035010 Mfgr Part#: PTS-04-IPP320/350-104
|
|
|
|
HAT Design Works
Ingenico LANE Adapter, Removable Key
Ingenico LANE Adapter, Removable Key (Pole or Wall Mount Required), Black
SKU: IOP-MNPA10LANE104 Mfgr Part#: MNPA10-LANE-104
|
|
|
|
HAT Design Works
Pole Clamp Monitor Mount
Mount a single display to 1.5 in, 1.75 in & 2 in Poles. Offers tilt and left to right pivot with friction adjustment. Positions display 4 inches from pole. Black. VESA adapter for 75x75 mm or 100x100 mm. TAA Compliant.
SKU: IOP-9170104 Mfgr Part#: 9170-104
|
|
|
|
HAT Design Works
Sngl mntr arm & Flexmnt BLK sup 3-10lbs
Full motion monitor arm with 24 inch reach and 16 inch heigh adjustment. Includes FlexMount for desk edge clamp, grommet, bolt-thru, side bolt, wall and reverse wall configurations. Supports 3-10 lbs. 75/100 mm VESA compatible. Black. TAA Compliant.
SKU: IOP-7000500FM104 Mfgr Part#: 7000-500-FM-104
|
|
|
|
HAT Design Works
Dual Tier Foldable Pole Mount, Black
Stack two displays one over this other. 28 inch pole. FlexMount for mounting six ways including Desk clamp, grommet, bolt-thru, side bolt, wall and reverse wall mount. Offers 12.5 inches of reach or folds to 3.5 inches. Cable management under arms and clip along pole. Color Black. TAA Compliant
SKU: IOP-9112D28FM104 Mfgr Part#: 9112-D-28-FM-104
|
|
|
|
HAT Design Works
Scanner Fork Only, Black
Pair with a HAT Design Works slider bracket to support a barcode scanner on the side of a monitor.
SKU: IOP-RP115913104 Mfgr Part#: RP115913-104
|
|
|
|
HAT Design Works
Ingenico iPP320 iPP350 Wall Mount Black
Wall mount your payment terminal. Adjustable tilt friction. Adjustable friction for left to right pivot. Secure device with included M2.5-0.45x12mm PPhMS plus Cable Clip. Compatible with Ingenico iPP320/iPP350. Mounting hardware not included.
SKU: IOP-PTSWMIPP32035010 Mfgr Part#: PTS-WM-IPP320-350-104
|
|
|
|
HAT Design Works
Stand for Single Monitor Monitor, Black
Free-standing single monitor mount. 14 inch pole height. Base dimensions 9.5 inches wide, 10.5 inches long.
SKU: IOP-9109S104 Mfgr Part#: 9109-S-104
|
|
|
|
HAT Design Works
Clamp Kit for Modular Now Poles, Black
Flexmount Clamp Kit for Modular Now Poles (MNPL1x-xxTB Pole Mount Only), Black
SKU: IOP-MNMT10FLXB Mfgr Part#: MNMT10-FLXB
|
|
|
|
HAT Design Works
7500 Deluxe Mntr Arm Sngl BLK sup6-12lbs
7500 Deluxe Monitor Arm. Includes Flexmount for desk edge clamp, grommet, bolt-thru, side bolt and wall mount. Spring assisted tilter with VESA Adapter. Supports 6-12lbs. Pass through cable management. TAA compliant. Black
SKU: IOP-7500800104 Mfgr Part#: 7500-800-104
|
|
|
|
HAT Design Works
CABLE WRAP 15 INCH LENGTH
SELF CLOSING WRAP, ABRASION RESISTANT
SKU: IOP-P11407815 Mfgr Part#: P114078-15
|
|
|
HAT Design Works
Tilter Bushing Reducer
Reduce bushing on mount cups, wall mount or slatwall mount to accommodate tilter shaft. Compatible with Innovative products only.
SKU: IOP-8302 Mfgr Part#: 8302
|
|
|
|
HAT Design Works
100 x 200mm Vesa Plate
Compatible with Innovative Design Works products only.
SKU: IOP-7VESA1X2603 Mfgr Part#: 7VESA1X2-603
|
|
|
|
HAT Design Works
FLEXMOUNT COMPONENTS FOR WALL
WALL CONFIGURATION ONLY. INCLUDES CUP COMPATIBLE w/3500 & 7000 SERIES AND LARGE L BRACKET. WALL SCREWS NOT INCLUDED.
SKU: IOP-8111WALL104 Mfgr Part#: 8111-WALL-104
|
|
|
|
HAT Design Works
Equinox 8500i Adapter Only (No Stand)
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414475 Mfgr Part#: RP414475
|
|
|
|
HAT Design Works
VerifoneMX915/MX925/M400/M440/PaxPX7ADPT
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414596 Mfgr Part#: RP414596
|
|
|
|
HAT Design Works
Verifone VX805 & VX820 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414637 Mfgr Part#: RP414637
|
|
|
|
HAT Design Works
Ingenico iSC250&iSC480 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414903 Mfgr Part#: RP414903
|
|
|
|
HAT Design Works
Ingenico iPP320&iPP350 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP415066 Mfgr Part#: RP415066
|
|
|
|
HAT Design Works
Equinox 6200m Adapter Only (No Stand)
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP415098 Mfgr Part#: RP415098
|
|
|
|
HAT Design Works
Wire Shelving Adapter Kit
Wire Shelving Adapter Kit for 1 inch diameter pole. 9110 Wall Mount required and sold separately.
SKU: IOP-8460603 Mfgr Part#: 8460-603
|
|
|
|
HAT Design Works
IngenLane ADPT w/QuickReleaseOnly NoStnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414304WK Mfgr Part#: RP414304-WK
|
|
|
|
HAT Design Works
Laptop Holder Accessory with VESA
Laptop holder securely grips your portable with quick attach and release. With 100x100mm VESA hole pattern to attach to a mount or ergonomic arm. Adjustable clasps allow free access to jacks and ports
SKU: IOP-5501124 Mfgr Part#: 5501-124
|
|
|
|
HAT Design Works
7Flex style Flexmount, Black
Configurable six ways including desk clamp, grommet, bolt thru, side bolt, wall and reverse wall mount. Black.
SKU: IOP-8374104 Mfgr Part#: 8374-104
|
|
|
|
HAT Design Works
Flex Shield Wings Add-on Kit
Flex Shield Wings Addon Kit 11.75" x 30". Two Wings Included. Requires Flex-Shield Sneeze Guard.
SKU: IOP-SHIELDWINGS Mfgr Part#: SHIELD-WINGS
|
|
|
|
HAT Design Works
Camera Bracket
Camera Bracket
SKU: IOP-8263603 Mfgr Part#: 8263-603
|
|
|
|
HAT Design Works
Univer Pymt Device Clamping ADPT No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP416355 Mfgr Part#: RP416355
|
|
|
|
HAT Design Works
Payment Terminal Stand, no adapter plate
For kitting purposes
SKU: IOP-PTS04104 Mfgr Part#: PTS-04-104
|
|
|
|
HAT Design Works
Circular Desk Mount, bolt-thru. PC Black
Diameter of base plate 6 inches. Bumpers adhered to base for non-slip grip and surface protection.
SKU: IOP-8312104 Mfgr Part#: 8312-104
|
|
|
|
HAT Design Works
12.5in Arm Exten Staxx & 9110 Series BLK
12.5 rigid extension arm can be added to the Staxx and 9110 series. Includes cable management under the arm. Die cast aluminum.
SKU: IOP-911812104 Mfgr Part#: 9118-12-104
|
|
