|
|
Home >
Point of Sale Computing > Accessories > HAT Design Works
|
POS Accessories
|
|
Cradles, Battery, Adaptor, Cables, Stylus, Display
Searching POS Accessories? POS Global has an assortment of POS accessories for you to select from.
You can browse online today and feel free to contact us
for more information or to better understand how our products can benefit you.
Plan on buying something else? Don't forget to purchase Cash Drawers.
|
|
Showing: 1 - 30 of 243 Items
|
Total Page(s): 9
|
1
2
3
4
5
6
7
8
9
|
|
Description |
Price
(USD)
|
Availability
|
|
HAT Design Works
Payment Device Stand with Quick Release
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Quick release, non-removeable key. Compatible with Supports Ingenico Lane 3000 / 5000 / 7000 / 8000. Counter mounting hardware not included. Black
SKU: IOP-PTS04LANEWK104 Mfgr Part#: PTS-04-LANE-WK-104
|
|
|
|
HAT Design Works
Payment Terminal Freestanding Base Kit
Payment Terminal Freestanding Base Kit
SKU: IOP-PTSFSB603 Mfgr Part#: PTS-FSB-603
|
|
|
|
HAT Design Works
Ingen Lane ADPT w/Locking KeyOnly NoStnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414304 Mfgr Part#: RP414304
|
|
|
|
HAT Design Works
Modular Now Yoke, tilter & VESA kit
Pair with a modular now pole sold separately.
SKU: IOP-MNYK10STVB Mfgr Part#: MNYK10-STVB
|
|
|
|
HAT Design Works
Ingenico LANE Payment Device Stand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included Key. Compatible with Supports Ingenico Lane 3000 / 5000 / 7000 / 8000. Counter mounting hardware not included. Black
SKU: IOP-PTS04LANE104 Mfgr Part#: PTS-04-LANE-104
|
|
|
|
HAT Design Works
4in Arm Exten Modular Now & 9110 Ser BLK
4" rigid extension arm can be added to the Modular Now and 9110 series. Die cast aluminum. Compatible with MNPL10, MNPA, MNTR, MNKB, MNYK
SKU: IOP-MNEA1004B Mfgr Part#: MNEA10-04B
|
|
|
|
HAT Design Works
Sngl mntr arm&Flexmnt BLK sup 10-22lbs
Full motion monitor arm with 24 inch reach and 16 inch heigh adjustment. Includes FlexMount for desk edge clamp, grommet, bolt-thru, side bolt, wall and reverse wall configurations. Supports 10-22 lbs. 75/100 mm VESA compatible. Black. TAA Compliant.
SKU: IOP-7000800FM104 Mfgr Part#: 7000-800-FM-104
|
|
|
|
HAT Design Works
Adhesive Base, Lightweight w/glue pad
Adhesive Base, Lightweight w/glue pad
SKU: IOP-PTSADBZNC Mfgr Part#: PTS-ADB-ZNC
|
|
|
|
HAT Design Works
8.5in Arm Exten Modular Now & 9110Sr BLK
8.5" rigid extension arm can be added to the Modular Now and 9110 series. Includes cable management under the arm. Die cast aluminum. Compatible with MNPL10, MNPA, MNTR, MNKB, MNYK
SKU: IOP-MNEA1008B Mfgr Part#: MNEA10-08B
|
|
|
|
HAT Design Works
Verifone & Pax Payment Device Stand
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Easily slide device into place and secure with included Torx, T15 L-Key. Counter mounting hardware not included.
SKU: IOP-PTS04M400MX91510 Mfgr Part#: PTS-04-M400/MX915-104
|
|
|
|
HAT Design Works
Quick Kit 12inch Pole w/Surface Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1012SB Mfgr Part#: MNPL10-12SB
|
|
|
|
HAT Design Works
Heavy Duty wall mount bracket black
Measures 9.5in long, 2.8in wide
SKU: IOP-8325104 Mfgr Part#: 8325-104
|
|
|
|
HAT Design Works
Modular Now Small Printer Tray for pole
Includes tray 6in x 5.5in, 8.5in extension arm, and yoke. Color black.
SKU: IOP-MNTR1108B Mfgr Part#: MNTR11-08B
|
|
|
|
HAT Design Works
Verifone Payment Device Stand P200/P400
Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Secure device with included Torx, T10 L-Key. Compatible with Verifone P200 & P400. Counter mounting hardware not included.
SKU: IOP-PTS04P200P400104 Mfgr Part#: PTS-04-P200/P400-104
|
|
|
|
HAT Design Works
Quick Kit 17 inch Pole w/Surface Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1017SB Mfgr Part#: MNPL10-17SB
|
|
|
|
HAT Design Works
Universal Payment Device Clamping Stand
Design includes reposition tabs with rubber grips to hold device securely. Ten slot locations adjusts to fit a variety of payment devices. Width range 2.9-3.8 inches. Maximum length 7.4 inches. Elevate your payment terminal 4 inches from surface. Adjustable tilt friction. Rotate your device left to right up to 180 degrees (use presets) or set to no rotation during time of installation. Cables may route above or pass through the surface. Counter mounting hardware not included. Black.
SKU: IOP-PTS04UNIV104 Mfgr Part#: PTS-04-UNIV-104
|
|
|
|
HAT Design Works
Small Screen Slider Bracket, 12", BLK
Extend your VESA adapter 12 inches to enable mounting of a payment terminal device or a scanner fork bracket to side of monitor. Made of 12 gauge cold rolled steelwith a reinforced design for stabilty. Includes hardware kit with 4 qty M4 x 10mm PPhMS, 3 qty PPhMS, M5-0.8 x 6mm B.O. and 1 qty 1/4" nylon cable clip. PTS adapters and scanner fork sold separately.
SKU: IOP-MNSL1012B Mfgr Part#: MNSL10-12B
|
|
|
|
HAT Design Works
Modular Now Printer Tray SM & wall mount
Includes tray 6x5.5in, 8.5in extension arm, and wall mount. Color black.
SKU: IOP-MNTR11WM08B Mfgr Part#: MNTR11-WM-08B
|
|
|
|
HAT Design Works
HAT DW SINGLE MONITOR ARM, NO MOUNT
24 INCH LONG REACH, SPRING ASSISTED TILTER AND VESA 75/100, BLACK. SUPPORTS 3 TO 10 LBS. MOUNT SOLD SEPARATELY.
SKU: IOP-7000500NMHD104 Mfgr Part#: 7000-500-NM-HD-104
|
|
|
|
HAT Design Works
Verifone P200 & P400 ADPT Only No Stnd
Replacement adapter. Fits on HAT Design Works mounts PTS-04, MNPA10. PTS-WM series.
SKU: IOP-RP414868 Mfgr Part#: RP414868
|
|
|
|
HAT Design Works
Modular Now Dual Yoke Assembly
Pair with a modular now pole sold separately.
SKU: IOP-MNYK10DYKB Mfgr Part#: MNYK10-DYKB
|
|
|
|
HAT Design Works
Adhesive Weighted Base with Glue Pad
Accessory only. Pair with Modular Now Payment Terminal Stands.
SKU: IOP-PTSADB603 Mfgr Part#: PTS-ADB-603
|
|
|
|
HAT Design Works
Through-Counter Display Mount, 36in BLK
Adjustable 7-36 inches. Tube passes through counter, the monitor mount's height is adjusted via a set screw in the mount. Internal cable routing, cables pass through counter, remaining out of view and safe from public reach. With lock in place tilter to set at preferred viewing angle. Includes VESA adapter with 75x75 mm and 100x100mm hole patterns. Surface mounting hardware not included. Clearance for 1/4-20 screws. Powder coat color black.
SKU: IOP-918936104 Mfgr Part#: 9189-36-104
|
|
|
|
HAT Design Works
Single Monitor Stand
Single Monitor Stand
SKU: IOP-DMRS1 Mfgr Part#: DMRS-1
|
|
|
|
HAT Design Works
Quick Kit 12 Inch Pole with Thru Mount
Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL1012TB Mfgr Part#: MNPL10-12TB
|
|
|
|
HAT Design Works
Verifone P200/P400 Wall Mount, Black
Verifone P200/P400 Wall Mount, Black
SKU: IOP-PTSWMP200P400104 Mfgr Part#: PTS-WM-P200-P400-104
|
|
|
|
HAT Design Works
Modular Now Printer Tray LG & wall mount
Includes tray 11x10.5in, 8.5in extension arm, and wall mount. Color black.
SKU: IOP-MNTR12WM08B Mfgr Part#: MNTR12-WM-08B
|
|
|
|
HAT Design Works
Sngl Mntr WllMnt&Exten sup30lbs ext7.6in
Supports displays up to 30 lbs. Pivot, tilt and rotate. Quick release VESA. Extends 7.6 inches from wall. Mounting hardware not included.
SKU: IOP-91104104 Mfgr Part#: 9110-4-104
|
|
|
|
HAT Design Works
Dual Quick Kit 17 inch w/Surface Mount
Mount two displays back to back. Includes spring assisted tilter compatible with 75x75 and 100x100 mm VESA hole patterns. Color Black
SKU: IOP-MNPL10D17SB Mfgr Part#: MNPL10-D-17SB
|
|
|
|
HAT Design Works
Pole Clamp with shims, Black
Clamp your monitor arm to 1.5, 1.75 & 2 inch diameter posts. Compatible with 3500, 7000, 7500, 9105, 7FLEX monitor arms (sold sep).
SKU: IOP-8210104 Mfgr Part#: 8210-104
|
|
|
|
|
|
1
2
3
4
5
6
7
8
9
|
|
Showing: 1 - 30 of 243 Items
|
Total Page(s): 9
|
|
Home >
Point of Sale Computing > Accessories > HAT Design Works
|
POS Accessories Cradles, Battery, Adaptor, Cables, Stylus, Display
|
|
